Machines
for the food processing industry
Düsseldorf . Deutschland Waste
Water Cleaning Basins (Production
Series DORNOW A and B) The
waste water cleaning basins (production series DORNOW A and
B) serve, above all, as subsidence zones for waste waters
with slowly working discharge devices. Substances
and particles heavier than water have the possibility to
deposit at the bottom. Lighter particles float on the water
surface. In
the basins are conveying devices, consisting of plastic
chains with drivers. The plastic drivers move at a very low
speed - if necessary around the clock - without causing any
noticeable whirl over the bottoms and near the water surface
of the cleaning basins. Thus, they remove, at one side of
the basin, the deposited particles (type A) and at the other
side of the cleaning basin the floating matter/particles,
too (type B). At
one point of the basins the waste water is let in as gently
as possible, at another point the water precleansed that way
leaves the cleaning basins again. The
water precleansed this way can be reused for other purposes
wherever necessary.
With
a minimum of electric energy (0.18 kW) one will achieve a
cleansing of the waste water to a high degree. One should
compare here the energy consumption of a decanter or of fast
rotating separators. Moreover,
the slow movement of the conveying facility reduces wear and
tear, in contrast to the a.m. alternative devices. It
must surely be considered as a disadvantage of the cleaning
basins that they occupy some floor space. However, they can,
in certain cases, be also put up in the open air - protected
from frost.
The
cleaning basins of the production series DORNOW A and B are
available in different sizes and construction types. Many
special designs can be supplied, too.
Waste
water cleaning basins
(production series DORNOW A from 10 - 25 m³)
made
of stainless
steel, with adjustable discharge device for sinking
matter/particles:
1010
Waste water cleaning basin A-A-VA,
cap. 10 m3, 8250 x 1800 x 2150 Waste
water cleaning basins
(production series DORNOW A from 10 - 25 m³)
made
of mild steel,
ground-coated, lacquered, with adjustable discharge device
for sinking matter/particles:
1020
Waste water cleaning basins A-A-ST,
cap. 10 m3, 8250 x 1800 x 2150
Waste
water cleaning basins
(production series DORNOW B from 10 - 25 m3)
made
of stainless
steel, with adjustable discharge device for sinking and
floating matter/particles:
1030
Waste water cleaning basins B-A-VA,
cap. 10 m3, 9750 x 1800 x 2150
1040
Waste water cleaning basins B-A-ST,
cap. 10 m3, 9750 x 1800 x 2150
Our
slowly rotating separators of the types 360 (Item-No. 1000)
and 390 (Item-No. 1001) can be connected before the cleaning
basins. The sieve fabrics can be exchanged, so that an
adaptation to the requirements is possible. They are also
available with automatic sieve cleansing facilities.
Treatise
Q59*:
"A simple way of cleaning waste water in the
potato and vegetable processing industry" Brochure
P201:
"Waste water treatment and separation
technology"
Pictures:
Please
see on the WEB
This
paper contains non-committal notes. We do not lay claim to
completeness. Alterations reserved. DORNOW total on the Web: www.dornow.de / www.dornow.com Q124 E2 Dornow food technology GmbH,
Willstätterstr. 12,
D-40549 Düsseldorf - Germany, USt-Id.-Nr. DE119264470 |